3D printers at MAX IV
| Printer name | Software | Material | Resolution and print size | Comment |
|---|---|---|---|---|
| Ultimaker S5 | Free Cura 3 | PLA, ABS, Nylon, composites 2.85mm filament | Build 33x24x30cm Layer 20-600μm | Workshop access after training USB |
| Ultimaker 2+ | Free Cura 3 | BS, PLA, composites 2.85mm filament | Build 22x22x20cm Layer 20-200μm | Workshop access after training SD card |
| Mark Two (markforged) | Licence Eiger | Nylon, glass fiber, carbon fiber 1.75mm | Build 32x13x15cm Layer 100μm | Licence constraints |
| Form 2 (formlabs) | Free preform | UV activated resin | Build 14x14x17cm Layer 100-25μm | Safety constraints |
Links
Ultimaker manual: https://ultimaker.com/en/resources/18787-user-manual
Ultimaker software: https://ultimaker.com/en/resources/51947-interface-overview
MarkTwo manual: https://support.markforged.com/hc/en-us/categories/115000131204
MarkTwo software: https://markforged.com/eiger/
Form2 manual: https://support.formlabs.com/hc/en-us/sections/115000004844-Printing-with-the-Form-2
Form2 software: https://formlabs.com/tools/preform/