In-situ plate experiments
…the beamtime. Sample creation is done directly in MXCuBE. MXCuBE beamline actions menu. The action specifically available with the crystallization plate adaptor are highlighted The first step of the experiment…
…the beamtime. Sample creation is done directly in MXCuBE. MXCuBE beamline actions menu. The action specifically available with the crystallization plate adaptor are highlighted The first step of the experiment…
Welcome to MAX IV! In this section of the web we have collected the some practical information. For answers to some of the most common questions, please see the FAQ…
…MAX IV Laboratory “At this stage, we are analysing the surface layer to get information about the chemical composition and electronic state of the passive films: the thickness, composition, and…
…track of this number and the corresponding sample/experiment using, e.g., the elogy logbook (https://elogy.maxiv.lu.se). The master file scan-####.h5 contains the command issued to perform the scan, the scanned parameters (e.g.,…
…to fabricate rare-earth-free permanent magnets. The goal is to deepen the knowledge in controlling the anisotropic properties which is crucial to optimize the magnetic performance and to fabricate a more…
…Credit: MAX IV The beamline has just entered the commissioning phase. “We will in parallel commission the beamline and finish up the installation of the experimental station. We have at…
…IV chevron_right Events 12 Jun 12 June 2024, 00:00 Data Management and Virtual Access NFFA-Europe Summer School 2024 16 Jun conference 16 June 2024, 14:00 COHERENCE 2024 More events chevron_right…
…supplying the high-temperature DH grid, we can reverse the process as well so we can take heat from the big grid and transform it to the local temperature inside the…
…play an important role in the development of next generation technologies to better our world. We support our European research communities and industries to drive change through innovative ideas and…
…sample positioner. The figure above shows the original view as seen by the camera. The red circle in the center specifies the beam position on the sample. The user defines…