Electrochemistry
The electrochemistry setup which is designed for performing photoemission measurements of the solid-liquid or liquid-gas interfaces in a dip-and-pull geometry. A three electrode setup can be dipped and then pulled…
The electrochemistry setup which is designed for performing photoemission measurements of the solid-liquid or liquid-gas interfaces in a dip-and-pull geometry. A three electrode setup can be dipped and then pulled…
The solid-state end station (SSES) is designed for studying solid-state material via advanced experimental techniques in an ultra-high vacuum (UHV) environment. The end station is composed of four UHV chambers…
…in late 1990-ies. Despite seemingly old, it is still competitive with the brand-new AFMs in terms of high-resolution topography determination. It is capable of both contact and tapping modes, allowing…
The Imaging Station is equipped with a robotic sample changer that is swapping the samples between the measurement position and an intermediate storage inside the vacuum chamber. For this reason,…
…beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further information. Follow this link to read more about all MAX IV Access modes….
…beam at the DanMAX beamline is intense enough to pass through the steel sample so that we could investigate the phase changes in real-time while being pulled by the mechanical…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…of inlet and outlet gas composition Analyser apertures 0.3 mm Gas dosing (available 2018-I) up to 8 individual gases (by user request) and their mixture. Fully automatic gas dosing system…
…PXRD2D, and the imaging instrument in the user program. The second powder diffraction instrument, HERDi, is scheduled for installation in late 2024. On this page and subpages, you can find…
…of this image. Right panel: height profile along the indicated line. Comparison between STM and ncAFM imaging/resolution Sample: SiC(0001), STM: Vbias = +1.25 V, It = 230 pA AFM: Vbias…