Accelerators
…an operator. We are responsible for delivering a stable high-quality beam to the users. This means operating and controlling the accelerator complex consisting of the 3 GeV linac, the 1.5…
…an operator. We are responsible for delivering a stable high-quality beam to the users. This means operating and controlling the accelerator complex consisting of the 3 GeV linac, the 1.5…
…to discuss electrolyte compatibility Potentiostat Bio-Logic SP200. E range +/- 10V. I range +/- 500 mA. Glove box A custom glove box can be attached to allow handling/loading of samples…
The solid-state end station (SSES) is designed for studying solid-state material via advanced experimental techniques in an ultra-high vacuum (UHV) environment. The end station is composed of four UHV chambers…
…in late 1990-ies. Despite seemingly old, it is still competitive with the brand-new AFMs in terms of high-resolution topography determination. It is capable of both contact and tapping modes, allowing…
…OMNY pin sample holders for the NanoMAX Imaging Station. Left: sample pins compatible usable at the NanoMAX imaging station. Sample preparation and mounting is essential for a successful beamtime. Discuss…
…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…of inlet and outlet gas composition Analyser apertures 0.3 mm Gas dosing (available 2018-I) up to 8 individual gases (by user request) and their mixture. Fully automatic gas dosing system…
…of this image. Right panel: height profile along the indicated line. Comparison between STM and ncAFM imaging/resolution Sample: SiC(0001), STM: Vbias = +1.25 V, It = 230 pA AFM: Vbias…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…