Science at Bloch

Bloch is heavily focused on angle resolved photoemission spectroscopy (ARPES) of conducting crystalline solids, specifically surfaces and 2D or layered materials. This technique provides direct insights into the energy and…

CoSAXS User information

…for capillaries, with liquid nitrogen cooling pump LNP96, temperature range -195 to 350 oC Anton Paar MCR 702 Rheometer with polycarbonate concentric cylinder sample geometry Microfluidic flow cells (please discuss your…

PXRD2D: Powder diffraction with area detector

…upstream towards downstream: Guard slits: Slits for removing stray scattering. Should not be used to define the beam size I0 diode Brass mask: Fixed Ø4 mm hole for removing stray…

Time resolved catalysis

…preparation is available. Samples must be prepared outside and transferred via air (or inert atmosphere using the glove box). The preparation chamber in the solid-gas endstation can be used for…

Beamline optics

…mm minimal magnetic gap. Energy (wavelength) range 4 – 20 keV (0.6 – 3.1 Å) using 1st – 11th harmonics of the IVU Monochromator (hDCM) At ~25 m, Si (111),…

CoSAXS Experimental station

…through vacuum operation will be possible by connecting directly to the incident collimation and the detector vacuum vessel. Otherwise, X-ray transparent windows, like mica, will be used. Most sample environments…

Science

MAX IV in a nutshell The core activity of MAV IV Laboratory is to produce and deliver highly collimated x-ray beams to a portfolio of beamlines used by scientists in a wide…

XRD data

The multimodal in-situ XAS-XRD endstation is used for in-situ / in-operando investigations with a total time resolution of currently about 20s. Exemplary data is shown here: Diffraction rings obtained from…

Experimental station

…the micro- or millisecond timescale. MicroMAX is a dedicated macromolecular crystallography beamline that will deliver exceptional micro-focus, achieving a focal spot as small as 1 μm2, which is two orders…