…Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat Potential Arbitrary Order R1 beam dynamics Internal_Note_20100820_M5_Pulsed_Sextupole_Injection_120611.pdf Internal_Note_20111102_Updated_Lattice_120611.pdf Internal_Note_20120313_Updated_Lattice_120611.pdf Internal_Note_20120904_Updated_Lattice_120913.pdf Internal_Note_20140526_High-chromaticity_1.5GeV_140604.pdf insertion devices…
…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
…+46462226631 Johan Selberg Office location: E100036 E-mail: Johan.Selberg@maxiv.lu.se Phone: +46462226645 Niklas Johansson Office location: D110070 E-mail: Niklas.Johansson@maxiv.lu.se Phone: +46462224575 Nils Pistora Mechanical designer Office location: D110050-6 E-mail: nils.pistora@maxiv.lu.se Phone: +46462221641…
The High-Temperature (HT) / catalysis / general-purpose ambient pressure cell enables photoemission measurements on catalytic and surface science-type systems at mbar pressures at temperatures up to 1000 C. At the…
…prevention, cancer radiotherapy, sustainable fuels, and better batteries MAX IV is quickly expanding its offerings to meet the demand and needs of researchers. 2023 was the first time all 16…
…stability and includes: Beam position monitor (position and intensity), ‘fast’ shutter (~10 ms), attenuators, Zr, and Ag energy reference foils, alignment laser, decoherer, and slits. All equipment is placed on…
…perform STM characterization of their samples in conjunction with their (spectrocopy) studies at other beamlines. Using vacuum suitcase at SPM lab it is possible to transfer the samples to/from STM…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
…facilities. The workshop is free of charge and will give an overview of the project and discuss the next steps for increased industrial use of large-scale research infrastructures. The program…
…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…