…Facility from the Université Joseph Fourier in Grenoble (France). During his PhD, postdoctoral studies, beamline scientist positions at the ID10A Troika beamline at the ESRF, he was among the European…
DetectorTypeMaximum frame rateActive areaResolution in pxPixel sizeNotes DECTRIS PILATIUS3 X 2M CdTe CdTe based hybrid pixel array detector – photon counting 250 Hz 253.7 x 288.8 mm2 1475 x 1679…
…within the European Commission MSCA framework. PRISMAS Grant agreement ID: 101081419 Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not…
…used to measure fluorescence emission from different kinds of solids in the infra-red, visible and ultraviolet spectral ranges. The excitation functions of these emissions can be determined by scanning the…
…mass fraction values corresponding to the real values of the reference standard. In this case photon flux has been adjusted for Cu to correspond a concentration of 2.1 ng/mm2. This…
…Bottom ash, the coarser fraction of ash left after waste burning. Photo: Mar Edo, RISE. It all depends on what other elements the metals are bound to; they are said…
…placed at the focus point of the beamline by sliding a movable frame. The gas-phase end station is designed for gas-phase targets and samples with high vapor pressure that are…
…station is equipped with spectrometers designed for investigating photo-stimulated fragmentation processes in gases and clusters. The ICE station is mobile and can be replaced with another setup on demand. The…
…with Katharina Cramer (Senior Fellow at University of Bonn / Center for Advanced Security, Strategic and Integration Studies and DAAD PRIME Fellow at Lund University, MAX IV) , Franz Hennies (Head of User…
The detector lab is a dedicated space for testing away from the beamlines, with a 40Gbit connection to the DAQ cluster allowing software development for full frame rate data streaming…