Aymeric Robert appointed Physical Sciences Director at MAX IV
Aymeric comes to MAX IV from the Linac Coherent Light Source at SLAC National Accelerator Laboratory in California, where he was the deputy division director for the Science and R&D…
Aymeric comes to MAX IV from the Linac Coherent Light Source at SLAC National Accelerator Laboratory in California, where he was the deputy division director for the Science and R&D…
…stages. The first part measured and verified the beamline optics with tele ptychography, where the beam size and shape were compared against theoretical data. In the next stage, scientists analysed…
…the laboratory’s advanced research techniques. “Our first experiment, which starts with paper straws, provides additional analysis capabilities into how paper straw material responds to changes in the environment in real-time,…
Half of the time for experiments at ForMAX will be reserved for academic and industrial members of the Treesearch consortium. The aim is multiscale structural characterisation of forest-based materials from…
…File system access at LUNARC – Lund University computing center, as /projects/maxiv Open access to published data are made available via SciCat Internal access while on site Transferring data to a…
…steel cylinder, typical flow rate will be updated soon; PEEK tubing and filters, Capillary mixing of 2 liquids is available. Liquids can be degassed in a separated vacuum chamber pumped…
…located onsite, where it is exchanged for cooling water. In addition, the building acts as a hub, connecting to the original, conventional district heating grid in Lund. Warmer water from…
…proposal and then on the Select Proposal button. To launch MXCuBE3 from an already open browser window, type the url http://mxcube.maxiv.lu.se. Once the interface loads, log in with you DUO…
…process for the 1st call is closed and completed. 2nd Call: The recruitment process for the 2nd call is closed and completed. Curious about the offered positions? See here the…
…where you will adjust parameters to achieve to a good spectral fit. The configuration will be used in the later elemental images creation. Instead of entering all parameters from scratch…