Photoluminescence end station
…crystals, glasses, ceramics, films, powders, etc.) can be studied. The end station is equipped with a closed-cycle helium cryostat with a cold-finger type sample holder, which provides sample temperatures T…
…crystals, glasses, ceramics, films, powders, etc.) can be studied. The end station is equipped with a closed-cycle helium cryostat with a cold-finger type sample holder, which provides sample temperatures T…
…point versions for tomography experiments. The holders are either made from copper (coated with gold) or made from aluminum (not coated). A reasonable amount of sample holders can be provided…
…electrode/sample exchanging. Two identical sample holders are available Beaker Can hold beakers up to 50 mm diameter and up to 60 mm height. Available beakers of 30, 60, 100, and…
…quick loading of an evaporation source, evaporation cell, etc., in the PREP without venting the main chamber. A pumping manifold for users with special requirements, an ion gun for Ar+…
…in late 1990-ies. Despite seemingly old, it is still competitive with the brand-new AFMs in terms of high-resolution topography determination. It is capable of both contact and tapping modes, allowing…
…or made from Copper but coated with Gold. The top of the pins can be modified to match the specific needs of individual samples. There are three different shapes/sizes of…
R3 beam dynamics High-Chromaticity_Optics_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20090902_Updated_Lattice_120614.pdf Internal_Note_20100318_Updated_Lattice_120614.pdf Internal_Note_20100512_Pulsed_Magnet_Injection_120612.pdf Internal_Note_20101101_Updated_Lattice_120614.pdf Internal_Note_20101203_Magnet_Synchronization_120612.pdf Internal_Note_20110117_Updated_Lattice_120612.pdf Internal_Note_20111124_Updated_Lattice_120611.pdf Internal_Note_20121107_Updated_Lattice_140129.pdf Internal_Note_20130724_OCO_Modeling_141009.pdf Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat…
…than I imagined.” The Gribshunden armour was perhaps 80 years old when the ship sank, and it is the only medieval mail armour in the world that can be identified…
…channel which could also hold significance for spintronics. A growing body of research has been devoted to the study of zigzag graphene nanoribbons and the emergence of spin-polarized transport channels…
…Open cycle, compressed air or “cold gas” N2 Temperature control Home-made sampleplates with a thermocouple Thermocouple on cryostat Pyrometer Sputtering Dedicated Ar line, automated sputtering (*under development) Characterization LEED and…