Aymeric Robert appointed Physical Sciences Director at MAX IV
Aymeric comes to MAX IV from the Linac Coherent Light Source at SLAC National Accelerator Laboratory in California, where he was the deputy division director for the Science and R&D…
Aymeric comes to MAX IV from the Linac Coherent Light Source at SLAC National Accelerator Laboratory in California, where he was the deputy division director for the Science and R&D…
…stages. The first part measured and verified the beamline optics with tele ptychography, where the beam size and shape were compared against theoretical data. In the next stage, scientists analysed…
…autumn 2022. It is specially designed for advanced studies on wood-based materials. The beamline is an initiative where several market-leading industry companies, mainly from the paper and pulp industry and…
Half of the time for experiments at ForMAX will be reserved for academic and industrial members of the Treesearch consortium. The aim is multiscale structural characterisation of forest-based materials from…
…File system access at LUNARC – Lund University computing center, as /projects/maxiv Open access to published data are made available via SciCat Internal access while on site Transferring data to a…
…steel cylinder, typical flow rate will be updated soon; PEEK tubing and filters, Capillary mixing of 2 liquids is available. Liquids can be degassed in a separated vacuum chamber pumped…
…connected to residences is composed of a new, polyethylene raised temperature resin (PE-RT plastic). The plastic piping system features heat-insulating foam and temperature alarms. The new pipes are cost-efficient, according…
…The wedges belonging to each energy or interleaved data set will be repacked together, and the resulting data set will be renamed. The separate wedge files are stored in a…
…process for the 1st call is closed and completed. 2nd Call: The recruitment process for the 2nd call is closed and completed. Curious about the offered positions? See here the…
…data normalized to 1 second. The Active area describes the acceptance of the detector. In our case the value is 0.5 cm2 for the RaySpec detector used. The distance should…