Solid-state end station
…spectroscopy (XAS) measurements. The base pressure of the the ANA is 1×10-10 mbar. The main instrument is a hemispherical electron energy analyzer (PHOIBOS 150 2D-DLD from Specs). The manipulator in the…
…spectroscopy (XAS) measurements. The base pressure of the the ANA is 1×10-10 mbar. The main instrument is a hemispherical electron energy analyzer (PHOIBOS 150 2D-DLD from Specs). The manipulator in the…
…right you will find sample requirements and the list of typical cantilevers that we use. The true working resolution achieved in different scanning modes is shown in the image gallery….
…pins compatible usable at the NanoMAX imaging station. Sample preparation and mounting is essential for a successful beamtime. Discuss the details early with the beamline staff / your local contact….
…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…
…beam at the DanMAX beamline is intense enough to pass through the steel sample so that we could investigate the phase changes in real-time while being pulled by the mechanical…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…time-resolved APXPS using please the HT cell, please, check Time-resolved APXPS page. Purpose To enable photoemission measurements at mbar pressures and up to 1000 C Description Small volume (1 L)…
…keV. It is possible to use either the ‘high energy resolution’ mode, (∆E/E~1e-4, hDCM Si111) or the ‘high intensity’ mode, (∆E/E~1e-2, hMLM) at all three instruments. The beam size varies…
…deposition is possible Approx distance flange-sample ~ 160 mm at 40o incidence Storage Carousel with 12* sample slots Table with main parameters of the analysis chamber. *Actual number of available…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…