…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
…of inlet and outlet gas composition Analyser apertures 0.3 mm Gas dosing (available 2018-I) up to 8 individual gases (by user request) and their mixture. Fully automatic gas dosing system…
Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
MAX IV, RISE, and Swerim invite you to the workshop Paving the way for industrial utilisation of MAX IV, focusing on increased industrial utility and availability of MAX IV for…
…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…
The study of nanomaterials attracts interest because of their wide range of applications and improvement possibility. Understanding a nanomaterial’s atomic structure is crucial in the efforts of improving their properties….
…discovered that while the zigzag graphene nanoribbon monolayer sank almost completely into a silicon carbide facet, its lower edge dissolved and mixed with the silicon carbide substrate. The researchers highlighted…
…The previous web version is still available to access on: maxiv-legacy.maxiv.lu.se although the latest updated information is only available on the new web. Contact MAX IV Communication team for web support….
Base pressure 7e-11 mbar Sample manipulation 4-axis Sample heating Radiative (up to ~ 500-700 C, PID-controlled) E-beam (up to ~1200 C, manual) Direct current (up to 10 A) Sample cooling…