AFM scanning modes

The Atomic Force Microscopy relies on scanning a very sharp tip across a surface of interest at a very close proximity or even touching it. The tip “sits” on a…

Honeycomb borophene: myth or reality?

…of different borophene sheets, with different shape, size and composition of the unit cell and different concentration of periodic B vacancies; some will be stable and some not. This is…

Prepare samples for the Sample Exchanger

…the shipment in EXI (the EXtended ISPyB interface) in advance, and provided a unique name for your shipment(s). Use the following steps: Log in to the application from the iPad…

User information

…freedom for alignment, and explicitly address this point in your proposal. The spin-resolved ARPES endstation has demonstrated baseline functionality and formally left commissioning, but is still very new. You are…

Catalysis Cell

…on catalytic and surface science type systems at mbar pressures. For the time-resolved APXPS please check Time-resolved APXPS page Description Small volume (1 L) cell with controllable gas supply. Standard…

High-Pressure Reactor

Vacuum vessel with possibility to generate up to 1 bar gas pressure above sample’s surface. Uses same heating and gas delivery/analysis system as the main (catalysis) setup Base Pressure 1…

Experimental station

The MAXPEEM endstation is shown in the scheme above, it comprises two main chambers: the preparation chamber, dedicated to sample preparation and treatment facilities, and the main chamber, dedicated to the analysis…

Simulation and Design

…can include slope errors from gravitational sag, thermos-elastic deformation, surface roughness and slope errors from the manufacturing process. During commissioning and beamline operation simulations can support the correction and identification…