Solid-state end station
The solid-state end station (SSES) is designed for studying solid-state material via advanced experimental techniques in an ultra-high vacuum (UHV) environment. The end station is composed of four UHV chambers…
The solid-state end station (SSES) is designed for studying solid-state material via advanced experimental techniques in an ultra-high vacuum (UHV) environment. The end station is composed of four UHV chambers…
…in late 1990-ies. Despite seemingly old, it is still competitive with the brand-new AFMs in terms of high-resolution topography determination. It is capable of both contact and tapping modes, allowing…
…OMNY pin sample holders for the NanoMAX Imaging Station. Left: sample pins compatible usable at the NanoMAX imaging station. Sample preparation and mounting is essential for a successful beamtime. Discuss…
…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…
…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…surf normal) Pressure range 5 x 10-10 – 30 mbar in situ gauge 0.5 mbar – 30 mbar Heaters Direct laser (CW, 1080 nm) Up to 1000C in 10 mbar…
Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…
…Microscope specifications Coarse tip positioning range, mm ~ 10 × 10 × 5 Fine positioning/scanning range, μm ~ 19 × 19 (12 × 12) Max / min sample temperature, oC…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…