Sample holders
…pins for the use with samples intended for tomographic measurements, as well as flat framed holders for 2D imaging applications. Currently the pins can be offered either made from Aluminium…
…pins for the use with samples intended for tomographic measurements, as well as flat framed holders for 2D imaging applications. Currently the pins can be offered either made from Aluminium…
…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…
…beam at the DanMAX beamline is intense enough to pass through the steel sample so that we could investigate the phase changes in real-time while being pulled by the mechanical…
…+46462226631 Johan Selberg Office location: E100036 E-mail: Johan.Selberg@maxiv.lu.se Phone: +46462226645 Niklas Johansson Office location: D110070 E-mail: Niklas.Johansson@maxiv.lu.se Phone: +46462224575 Nils Pistora Mechanical designer Office location: D110050-6 E-mail: nils.pistora@maxiv.lu.se Phone: +46462221641…
…time-resolved APXPS using please the HT cell, please, check Time-resolved APXPS page. Purpose To enable photoemission measurements at mbar pressures and up to 1000 C Description Small volume (1 L)…
Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…
…slots is normally less than that because some slots are occupied with a tip carrier, few tips/QPlus sensors, test samples, etc. More storage may be available upon a timely request….
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
…materials research as part of a recently completed project funded by Vetenskapsrådet (DNR: 2018-06378). The project has focused on tackling challenges that limit the industrial use of these types of…
Beamline Staff Below you will find the FinEstBeAMS beamline team Antti Kivimäki Beamline Manager Responsibilities: Beamline manager FinEstBeAMS, Gas-phase end station E-mail: Antti.Kivimaki@maxiv.lu.se Phone: +46462226577 Kirill Chernenko Research Engineer Responsibilities:…