…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…surf normal) Pressure range 5 x 10-10 – 30 mbar in situ gauge 0.5 mbar – 30 mbar Heaters Direct laser (CW, 1080 nm) Up to 1000C in 10 mbar…
Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…
…LN2 bath cryostat ~ 12 hours stable operation at 110 K per one cryostat filling Ports for atom/molecular sources DN40CF × 2 if long-distance microscope is not needed Imaging during…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
…materials research as part of a recently completed project funded by Vetenskapsrådet (DNR: 2018-06378). The project has focused on tackling challenges that limit the industrial use of these types of…
…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…
… The Nanostructure group from the University of Copenhagen, headed by Kirsten M. Ø. Jensen together with Mikkel Juelsholt, took advantage of total scattering with pair distribution function analysis at…
…discovered that while the zigzag graphene nanoribbon monolayer sank almost completely into a silicon carbide facet, its lower edge dissolved and mixed with the silicon carbide substrate. The researchers highlighted…