Solid-state end station

…spectroscopy (XAS) measurements. The base pressure of the the ANA is 1×10-10 mbar. The main instrument is a hemispherical electron energy analyzer (PHOIBOS 150 2D-DLD from Specs). The manipulator in the…

Atomic Force Microscope

…right you will find sample requirements and the list of typical cantilevers that we use. The true working resolution achieved in different scanning modes is shown in the image gallery….

Sample holders

…pins compatible usable at the NanoMAX imaging station. Sample preparation and mounting is essential for a successful beamtime. Discuss the details early with the beamline staff / your local contact….

Access modes

…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…

Technical Notes

R3 beam dynamics High-Chromaticity_Optics_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20090902_Updated_Lattice_120614.pdf Internal_Note_20100318_Updated_Lattice_120614.pdf Internal_Note_20100512_Pulsed_Magnet_Injection_120612.pdf Internal_Note_20101101_Updated_Lattice_120614.pdf Internal_Note_20101203_Magnet_Synchronization_120612.pdf Internal_Note_20110117_Updated_Lattice_120612.pdf Internal_Note_20111124_Updated_Lattice_120611.pdf Internal_Note_20121107_Updated_Lattice_140129.pdf Internal_Note_20130724_OCO_Modeling_141009.pdf Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat…

Staff

The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…

High-Temperature Cell

…time-resolved APXPS using please the HT cell, please, check Time-resolved APXPS page. Purpose To enable photoemission measurements at mbar pressures and up to 1000 C Description Small volume (1 L)…

Microscope

…deposition is possible Approx distance flange-sample ~ 160 mm at 40o incidence Storage Carousel with 12* sample slots Table with main parameters of the analysis chamber. *Actual number of available…

Technical Infrastructure

The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…