R3 beam dynamics High-Chromaticity_Optics_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20090902_Updated_Lattice_120614.pdf Internal_Note_20100318_Updated_Lattice_120614.pdf Internal_Note_20100512_Pulsed_Magnet_Injection_120612.pdf Internal_Note_20101101_Updated_Lattice_120614.pdf Internal_Note_20101203_Magnet_Synchronization_120612.pdf Internal_Note_20110117_Updated_Lattice_120612.pdf Internal_Note_20111124_Updated_Lattice_120611.pdf Internal_Note_20121107_Updated_Lattice_140129.pdf Internal_Note_20130724_OCO_Modeling_141009.pdf Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat…
In a recent experiment at DanMAX beamline, researchers from Tampere University deformed steels using a specially designed mechanical test setup. They investigated the effects of the deformation speed on the…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…moment, this is the only available sample environment at the solid-gas endstation. The Catalysis AP cell is currently being upgraded and will be available for users in 2025. For the…
…in 2022. These statistics are published in the MAX IV Annual Report 2023, which is now released. From the new MAX IV Annual Report: 2023 in numbers. Research on diabetes…
…PXRD2D, and the imaging instrument in the user program. The second powder diffraction instrument, HERDi, is scheduled for installation in late 2024. On this page and subpages, you can find…
…of this image. Right panel: height profile along the indicated line. Comparison between STM and ncAFM imaging/resolution Sample: SiC(0001), STM: Vbias = +1.25 V, It = 230 pA AFM: Vbias…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
MAX IV, RISE, and Swerim invite you to the workshop Paving the way for industrial utilisation of MAX IV, focusing on increased industrial utility and availability of MAX IV for…
…Oulu (FIRI coordinator) E-mail: marko.huttula@oulu.fi Phone: +358 40 056 6218 Edwin Kukk University of Turku E-mail: edwin.kukk@utu.fi Phone: +358 2 333 6089 Mika Lastusaari University of Turku E-mail: mika.lastusaari@utu.fi Phone:…