Experimental station
…X95 rails and carriages and can be removed/replaced for other equipment if needed. DanMAX beam conditioning unit. Beam enters from the right sides. An evacuated flight tube is used for…
…X95 rails and carriages and can be removed/replaced for other equipment if needed. DanMAX beam conditioning unit. Beam enters from the right sides. An evacuated flight tube is used for…
…5 x 5 mm2. The membrane thickness should be 50–100 nm, depending on X-ray energy. The membrane sizes should be from 0.5 x 0.5 mm2 up to 1.5 x 1.5 mm2….
…some other source. Using a one-time password is one commonly used technology to achieve 2-factor authentication. All external access to MAX IV resources requires two-factor authentication via Time-Based One-time Password…
…the most prioritised instruments. In addition, we are working internally with a MAX IV Roadmap identifying activities throughout the organisation needed to achieve the vision and mission as described in…
…with ideal system theory. “This similarity can be easily understood by considering the reactivity of the monomer and crosslinker during synthesis. While the behavior is well-anticipated by classical theory, it…
…or CMOS) Related article: DOI: 10.1021/acs.nanolett.1c04662 Room temperature only The SoftiMAX STXM (currently unavailable) The SoftiMAX STXM end-station is currently offering STXM and Ptychography imaging techniques to general users. It is a room-temperature system that…
…and conditions. Due to the extremely small scale of interconnects and the complex metal stacks studying actual working chips is difficult. Instead, we are measuring on model chips. Using these results for…
…to the many opportunities this enables for us and the Swedish research community. The new ordinance will be effective from March 12, 2024. Read the full press release on MAX…
…in 2024. Methods X-ray fluorescence (XFM) mapping Using the nano-focused beam, information about the local elemental composition of the illuminated area can be extracted by measuring the secondary X-ray fluorescence…
…KFe2As2 with only hole pockets. Pairing symmetry refers to how electrons at the fermi surface couple to each other. The phenomenon of superconductivity occurs within materials with a second-order…