Additive manufacturing

…Free preform UV activated resin Build 14x14x17cm Layer 100-25μm Safety constraints Links Ultimaker manual: https://ultimaker.com/en/resources/18787-user-manual Ultimaker software: https://ultimaker.com/en/resources/51947-interface-overview MarkTwo manual: https://support.markforged.com/hc/en-us/categories/115000131204 MarkTwo software: https://markforged.com/eiger/ Form2 manual: https://support.formlabs.com/hc/en-us/sections/115000004844-Printing-with-the-Form-2 Form2 software: https://formlabs.com/tools/preform/…

Safety requirements for users

…safety test Safety Test Material for Users Log in to DUO and complete the safety test questions found in the link shown in the picture below. Upon completing the safety…

Beamline optics

…all slope errors and heat load deformations on these mirrors are diminished in the dispersion plane in a well-known manner. Optical element  M1 common M2 common PG common M3 Branch…

Beamline optics

…plane of the grating G), in addition to focusing horizontally at the exit slit. The monochromator is a combined collimated cNIM and cPGM type. The monochromator energy-disperses the radiation, which…

Post beamtime

…the motors sx and sy were recorded, providing 100 motor positions and 100 detector images. The main file also contains the scan command used, as well as a snapshot of…

SINCRYS – Single (micro) crystal X-ray diffraction

…the available techniques at MAX IV and complement the BioMAX and MicroMAX beamlines where the focus is on high-throughput macromolecular crystallography. SINCRYS will be tailored for smaller unit cells commonly…