Solid-state end station
…a vacuum suitcase to the PREP. All the chambers can be pumped and vented independently. The base pressure of the LL is 1×10-9 mbar or better. A maximum of 12…
…a vacuum suitcase to the PREP. All the chambers can be pumped and vented independently. The base pressure of the LL is 1×10-9 mbar or better. A maximum of 12…
…right you will find sample requirements and the list of typical cantilevers that we use. The true working resolution achieved in different scanning modes is shown in the image gallery….
…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…
…beam at the DanMAX beamline is intense enough to pass through the steel sample so that we could investigate the phase changes in real-time while being pulled by the mechanical…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
…facilities. The workshop is free of charge and will give an overview of the project and discuss the next steps for increased industrial use of large-scale research infrastructures. The program…
…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…
…nanomaterial, establish the atomic structure and isolate the effects of the size. We studied this particular system because we can handle particle size using simple tools in the chemical synthesis,…
…microscopy. These efforts provided valuable insights about the topological surface state of the ribbons, and they also pointed to the material’s lower edge surface state the Fermi energy as a…