Solid-state end station

The solid-state end station (SSES) is designed for studying solid-state material via advanced experimental techniques in an ultra-high vacuum (UHV) environment. The end station is composed of four UHV chambers…

Atomic Force Microscope

…in late 1990-ies. Despite seemingly old, it is still competitive with the brand-new AFMs in terms of high-resolution topography determination. It is capable of both contact and tapping modes, allowing…

Access modes

…of fast access proposals can be found here. Proprietary access chevron_right The complete beamline setup is available for Proprietary users, please contact the MAX IV Industrial Relations Office for further…

High-Temperature Cell

…of inlet and outlet gas composition Analyser apertures 0.3 mm Gas dosing (available 2018-I) up to 8 individual gases (by user request) and their mixture. Fully automatic gas dosing system…

Experimental station

Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…

Microscope

…AFM Si(111)-(7×7) scanning conditions: Vbias = 0.00 V, df = -27.1 Hz (f = 28.04 kHz) Left panel: topography map Z(X,Y), inset in the top-right is a fast Fourier transform…

Technical Infrastructure

The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…

Workshop: Industrial utilisation of MAX IV

…materials research as part of a recently completed project funded by Vetenskapsrådet (DNR: 2018-06378). The project has focused on tackling challenges that limit the industrial use of these types of…

Staff

…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…