Solid-Gas Endstation
…Sample requirements This endstation uses slightly custom “flag” style sample plates. These can have a hole in the plate to allow for direct heating of the sample via an infrared…
…Sample requirements This endstation uses slightly custom “flag” style sample plates. These can have a hole in the plate to allow for direct heating of the sample via an infrared…
Samples and sample holder for the SPELEEM microscope The image below shows the sample holder (cartridge) used in SPELEEM. The sample is fixed into the sample holder with a Mo cap…
…to attach to our sample holders (i.e. a solid pellet 13 or 5 mm in diameter, wrapped in Kapton tape, see below). The sample should be reasonably simple – not…
…evacuation routes and go to the assembly point. On your way out, warn people in your surroundings and encourage them to evacuate. Do not use the elevators. If you observe…
…can be achieved. The broadband multilayer monochromator plays a pivotal role in ensuring an ample supply of X-ray photons, facilitating high-speed tomography. Sample Goniometer DanMAX’s primary sample goniometer is built…
ForMAX provides selected dedicated sample environments for its users, as listed below. More sample environments are under development. Users can bring their own sample environments, but we can provide only…
…frame) 75 Hz @ 16-bit; 100 Hz @ 12-bit 30 Hz @ 16-bit; 121 Hz @ 12-bit Sample manipulation ForMAX is equipped with a modular configuration of sample stages from LAB…
…sample position, is 30 um x 15 um (width x height) Most sample environments will be at ambient pressure No toxic gas handling will be available at the sample position…
…There are multiple things to consider when choosing the photon energy for your experiment: What does the beamline offer? The diffraction endstation allows for photon energies between 5 keV and…
…outside that enclosure, e.g. if highly toxic substances are used, then press a fire alarm button to initiate an evacuation of that building. Personal injury Give first aid, in case…