High-Temperature Cell
…time-resolved APXPS using please the HT cell, please, check Time-resolved APXPS page. Purpose To enable photoemission measurements at mbar pressures and up to 1000 C Description Small volume (1 L)…
…time-resolved APXPS using please the HT cell, please, check Time-resolved APXPS page. Purpose To enable photoemission measurements at mbar pressures and up to 1000 C Description Small volume (1 L)…
Once completed, the DanMAX experiment station will host two instruments for powder diffraction and one for full-field imaging and tomography. Currently, we have the first of the powder diffraction instruments,…
…slots is normally less than that because some slots are occupied with a tip carrier, few tips/QPlus sensors, test samples, etc. More storage may be available upon a timely request….
The Technical Infrastructure team is part of Engineering II and is in charge of Cooling, Ventilation, Compressed air, Cryo and gas systems. The team supports the entire MAX IV laboratory…
…materials research as part of a recently completed project funded by Vetenskapsrådet (DNR: 2018-06378). The project has focused on tackling challenges that limit the industrial use of these types of…
…Photoluminescence end station E-mail: Kirill.Chernenko@maxiv.lu.se Phone: +46462226584 Weimin Wang Research Engineer Responsibilities: Solid-state end station E-mail: weimin.wang@maxiv.lu.se Phone: +46462226574 Calle Preger Postdoc Responsibilities: Development and commissioning of Aerodynamic lens sample…
The study of nanomaterials attracts interest because of their wide range of applications and improvement possibility. Understanding a nanomaterial’s atomic structure is crucial in the efforts of improving their properties….
…discovered that while the zigzag graphene nanoribbon monolayer sank almost completely into a silicon carbide facet, its lower edge dissolved and mixed with the silicon carbide substrate. The researchers highlighted…
Since the website is newly launched, we keep working to optimize its functionality and content. Please expect errors and use the search bar function should you not find the information…
…we use a custom-made receiver on the manipulator in the PREP chamber of the experimental set up. This receiver allows for efficient and controllable sample heating/cooling but most importantly for…