User information

…here: https://www.maxiv.lu.se/user-access/call-for-proposals/ A beamtime at FlexPES can start (earliest) from Tuesday 08:00 and finish (latest) 08:00 the following Monday. Therefore the maximum possible length of a beamtime is 6 full days….

MicroMAX

…the call see https://www.maxiv.lu.se/user-access/call-for-proposals/. MicroMAX is open for standard for rotational crystallography with the MD3-UP diffractometer, ISARA sample changer and Eiger2 X CdTe 9M detector using the crystal monochromator and CRL…

Safety requirements for contractors

…dem som är hotade av faran. Tryck på en brandlarmsknapp för att starta utrymningslarmet (larmet skickas också till SOS Alarm) och utrym byggnaden. Ring 112 till SOS Alarm så snart…

Safety requirements for employees

In order to access the MAX IV facility you must study the current safety information, and pass a safety test on the subject. This applies to all persons who are…

Photoluminescence end station

…of 10 – 300 K. Sample environment: The cryostat, mounted on a rotational stage, is installed on an XYZ manipulator (Thermionics) facilitating the alignment of the sample with respect to…

Low Density Matter branch

XYZ VG Omniax manipulator with a rotation stage in horizontal arrangement Sputter gun Yes (IS 40C1 from Prevac) Dosing Gas-sending system with 4 separate gas lines and 1 liquid vapor…

Experimental station

…motorized XYZ trolley. The sample to detector distance can be varied between approximately 0.8 and 7.6 m. Details about the full-field tomography and SWAXS setups is found in the menu…

PXRD2D: Powder diffraction with area detector

…beam stops in various diameters mounted on carbon fiber rods are available. Motorized motion along XYZ. All equipment is mounted on X95 rails and can quickly be reconfigured if needed….