Science at NanoMAX

X‐ray imaging approaching the low nanometer range is one of the most rapidly and strongly developing areas at all modern synchrotrons, e.g., ESRF, PETRA III, APS, Soleil or NSLS II….

PyMCA XRF imaging guide

…data normalized to 1 second. The Active area describes the acceptance of the detector. In our case the value is 0.5 cm2 for the RaySpec detector used. The distance should…

History

accelerated and are blinded by an intense light beam. The synchrotron light is observed experimentally. 1950 Hannes Alfvén and Nicolaj Herlofsson predicted that the light from the Crab Nebula was synchrotron…

Research projects

…Student: Lund University Evelina Gorjatsova   To meet sustainability goals, a transition into circular economy is urgently needed. Therefore, previously overlooked residual streams need to be used as raw materials….

User information

…of beamtime per proposal. For further info on FA, please refer to this page: https://www.maxiv.lu.se/user-access/access-modes/fast-access/ Writing proposals FlexPES is oversubscribed, so proposals should be compelling and carefully written in order…

Riverine iron survives salty exit to sea

…sediment. “A very important finding was that the organic iron complexes were much more resistant across the salinity gradient, while the iron oxides aggregated to a large extent,” explained Herzog….

Remote Experiments at BioMAX

…MXCuBE also supports features for multiuser access. Please see the MXCuBE remote access documentation. MXCuBE3 links to the beamline video feed and chat tool The data will be stored in…

Prepare samples for the Sample Exchanger

…on the goniometer, the Eiger detector has moved back beamstop and collimators are retracted and the robot is parked in a safe position and disabled. You can do all this…