MXCuBE3 at BioMAX – User Guide

…or 100 microns). Transmission: If you use the 20 or 50 micron aperture, a transmission of about 50 -100 % is appropriate. For the 10 micron aperture, use 100 %…

Previous SCIENTÍFika

…18 October 2021, 13:45 CET Molecular dissociation following x-ray absorption – how can we know, what happened during the crucial early stages Speaker: Prof Edwin Kukk, Head of Materials Research Laboratory,…

Diffraction station

Sample Area Hutch Diffraction station parameters Photon energy 5-28 keV Routine operation 8-15 keV Focal spot size 50 – 200 nm Measured: 98 nm at 8 keV, 62 nm at…

Beamline optics

…azimuthal angle Horizontal /90° Vertical /0° Vertical /180° Horizontal 90° ‘narrow’ opening in vertical 0-100 µm Horizontal 90° Horizontal 90° ‘narrow’ opening in vertical 20-160 µm Horizontal 90° Position to proceeding…

Sample environments and equipment

…rotary encodes and a full step resolution of 5 µm. Scan area 150 mm by 100 mm. One of the two axis can be used for continuous scans. The stage…

Beamline optics

…on resolution/spotsize Energy resolution 1meV at 21eV, 2meV at 63eV (measured, 800L/mm, 20μm exit slit) Gratings All user beamtimes so far have operated on a single grating (800 L/mm cPGM)…

APXPS

General information SR beam spot size 100 µm x 100 µm Pressure range for XPS measurements UHV to 20 mbar Analyser SPECS Phoibos 150 NAP Energy range 30 to 1500…

Hitachi FlexSEM 1000 ii

20 kV​ Specimen stage and positioning 3-Axis Motorized Stage​ X : – 50 mm Y : – 40 mm Z : 5 to 33 mm Rotation : 360o Tilt :…

Safety requirements for contractors

…either acute or delayed. Acute damage occurs at high doses (above 1000 mSv) received over a short period (weeks) and the result is damaged or dead cells. This could lead

Safety requirements for employees

…area. The alarm is most likely due to induced activity (see section 4). To ensure that no one remains inside the area, an accelerator area has to be searched before…