Beamline optics

…A Exit slit Branch A M4 Branch A M3 Branch B Exit slit Branch B M4 Branch B Shape Toroid Plane Plane Cylinder Rectangle Toroid Toroid rectangle  Toroid Deflection /…

Low Density Matter branch

The Low Density Matter branch is housing 1) the mobile coincidence spectroscopy end station (ICE, Ions in Coincidence with Electrons) at the upstream (EB01) position and 2) the permanently installed LDM-PES endstation at the…

Experimental station

A-branch – ARPES The A-branch is open for general users. Beamtime allocations are made in units of a half week or a full week depending on their complexity (1 week…

A-branch measurement chamber

The main measurement chamber on the A-branch maintains a base pressure in the 10-11mbar range, and has a double μ-metal liner for residual magnetic field < 0.1μT. The analyzer is…

Surface & Material Science branch

The permanent UHV end station EA01 on the SMS branch is dedicated to photoelectron and x-ray absorption spectroscopy studies on surfaces and thin films. It comprises four chambers: an analysis…

Experimental stations

FlexPES beamline is split into two branches, the Surface & Material Science (SMS) branch and the Low Density Matter (LDM) Branch. On the SMS branch, there are two focal points….

Staff

…Scientist Office location: E120031-2 Responsibilities: LDM-branch maintenance and user support; focus on the liquid jet setups E-mail: Gunnar.Ohrwall@maxiv.lu.se Phone: +46462224665 Maxim Tchaplyguine Scientist Office location: E120031-1 Responsibilities: LDM-branch maintenance and…

Beamline optics

…APXPS branch, 5 µm x 25 µm at RIXS branch Beamline flux curve measured on the APXPS branch BPM diode: Approximate beamline resolution measured with different gases in the beamline…

Beamline optics

…(ellipsoidal M4 mirror), and ACLEEM microscope as the end station. The spot size at the sample position (bottom figure) in the XPEEM branch is around 18(h) x 15(v) µm² (with…