The PXRD2D instrument has been designed to be very flexible in order to accommodate a wealth of sample environments. The Instrument is built on a stable granite stage that holds all equipment except the area detector. The main sample stage is a Symetrie Breva ST hexapod with a capacity of 200 kg and a mechanical repeatability of ±0.5 µm. Various positioners and sample environments can be placed on top of the hexapod using a custom made kinematic mount. For further details see the Sample Environment page.

The area detector, DECTRIS PILATUS3 X 2M CdTe, is placed downstream of the granite block and hexapod. It is placed on a 500 mm long translation stage oriented along the beam direction. The direct beam position is close to the bottom edge and nearly centered in the horizontal direction. It is currently not possible to translate the detector up/down nor inboard/outboard. A new detector gantry will be installed along with the imaging instrument. This gantry will allow full XYZ motion in addition to a 45 degree tilt of the detector towards the beam.

Diffraction image from SRM LaB6
Diffraction image from LaB6 recoded using 35 keV X-rays

An energy resolved silicon drift detector, RAYSPEC SiriusSDD, fluorescence detector is mounted on the outboard side of the instrument in a backscattering geometry. The signal is subsequently processed in a FalconX pulse processor. The angle and position of the detector is adjusted manually but the exact sample to detector distance can be adjusted using the translation stage.

The DanMAX PXRD2D instrument in a standard PXRD comfiguration
The DanMAX PXRD2D instrument in a normal PXRD configuration using the capillary spinner in a horizontal geometry.
DanMAX PXRD2D instrument in PDF / total scattering configuration
The DanMAX PXRD2D instrument in the PDF / Total Scattering configuration using the capillary spinner in a horizontal geometry.
DanMAX PXRD2D instrument in 2D mapping configuration using XRD and XRF
The DanMAX PXRD2D instrument in the 2D mapping configuration acquiring both spatially resolved PXRD and XRF data.

Various equipment is mounted on the instrument, listed here from upstream towards downstream:

  •             Guard slits: Slits for removing stray scattering. Should not be used to define the beam size
  •             Ion chamber
  •             Brass mask: Fixed Ø4 mm hole for removing stray scattering (mounted on microscope holder)
  •             Microscope camera: microscope mounted above the beam at a 45 degree angle
  •             Collimator/pinhole: Collimator with exchangeable pinholes. Motorized XY translation, manual RxRy rotations
  •             SAMPLE
  •             PN diode: A compact PN diode can be inserted (pneumatic) between sample and beam stop to facilitate alignment of e.g. slits and samples.
  •             Beam stop: Tungsten beam stops in various diameters mounted on carbon fiber rods are available. Motorized motion along XYZ.


All equipment is mounted on X95 rails and can quickly be reconfigured if needed.