MXCuBE3 at BioMAX – User Guide
…or 100 microns). Transmission: If you use the 20 or 50 micron aperture, a transmission of about 50 -100 % is appropriate. For the 10 micron aperture, use 100 %…
…or 100 microns). Transmission: If you use the 20 or 50 micron aperture, a transmission of about 50 -100 % is appropriate. For the 10 micron aperture, use 100 %…
…and acetylcoenzyme A (AcCoA), the enzyme choline O acetyltransferase (ChAT) synthesizes the neurotransmitter acetylcholine in neurons, T cells and B cells. Although ChAT plays a crucial role in acetylcholine metabolism…
Sample Area Hutch Diffraction station parameters Photon energy 5-28 keV Routine operation 8-15 keV Focal spot size 50 – 200 nm Measured: 98 nm at 8 keV, 62 nm at…
…azimuthal angle Horizontal /90° Vertical /0° Vertical /180° Horizontal 90° ‘narrow’ opening in vertical 0-100 µm Horizontal 90° Horizontal 90° ‘narrow’ opening in vertical 20-160 µm Horizontal 90° Position to proceeding…
…rotary encodes and a full step resolution of 5 µm. Scan area 150 mm by 100 mm. One of the two axis can be used for continuous scans. The stage…
…on resolution/spotsize Energy resolution 1meV at 21eV, 2meV at 63eV (measured, 800L/mm, 20μm exit slit) Gratings All user beamtimes so far have operated on a single grating (800 L/mm cPGM)…
General information SR beam spot size 100 µm x 100 µm Pressure range for XPS measurements UHV to 20 mbar Analyser SPECS Phoibos 150 NAP Energy range 30 to 1500…
Parameter Value Resolution 4.0 nm at 20kV(High Vacuum) 15 nm at 1kV(High Vacuum) 5.0 nm at 20kV (Low Vacuum) Magnification 6x-300,000x (photo mode) 16x-800,000x (on display) Accelerating voltage 0.3 to…
…lights above the door. Accelerator Access Door Beamline Access Door Open concrete door to an accelerator Area 8. Radiation outside controlled areas The dose constraint implemented at MAX IV is…
…to a controlled area are marked “Kontrollerat område” (controlled area) and are equipped with information lights above the door. Accelerator Access Door Beamline Access Door Open concrete door to an…