Proposal Writing Guide

…matched to the proposed experiment, and why it would be difficult or impossible to do in a home lab or most other beamlines. Provide preliminary data if there could be…

In-situ plate experiments

…it is impossible to ensure that the beam would not hit any samples during the measurement. The “calculate_flux” script under the Beamline Actions menu does not work either. If you…

Research projects

…mg/kg of Cr(VI)) as its toxicity depends on its oxidation state. The complex matrix of ash fractions and biochars makes accurate determination of oxidation states for chromium near-impossible with conventional…

The role of synthesis gas in tomorrow’s sustainable fuels

…the reaction mechanism.” Indeed, observing the Fischer-Tropsch reaction is a considerably difficult effort, and it is basically impossible to identify the reaction intermediates. Experimental information is almost entirely indirect, and…

FAQ

…experiments are impossible to perform at NanoMAX. It means that such capabilities have to be provided by the user side. Many different sample environments have been used at the diffraction…

User information

…for ARPES. Transfer into the STM chamber will become impossible for sample heights over 5.9mm (measured from the surface of the sample plate) If you bring your own sample plates,…

Previous SCIENTÍFika

…enable experiments impossible otherwise. Later, the implementation of two-dimensional IR detectors allowed hyperspectral imaging of large samples with high spatial resolution. The turn of the century brought the advent of…